What do security camera lights mean? Solid red means four things across six makers
A solid red light means recording on a Wyze, starting up on a Tapo, no Wi-Fi on a Blink and a faulty LED on a Nest. Every colour, by brand.
Last updated · source-check dates are listed at the foot of this page
On this page
It depends entirely on the brand. On a Wyze or eufy camera it usually means someone is watching or it is recording; on a Tapo it means starting up; on a Blink Mini or a Reolink battery camera it means no Wi-Fi; on a Nest Cam Indoor (wired, 3rd gen) it means "LED isn't working properly". Every meaning here is quoted from the maker's own support page or guide, read 4 October 2026.
What does a solid red light on a security camera mean?
There is no industry standard, and red is where that matters most. The table puts the six makers side by side.
| Maker | Camera | Solid red means, in the maker's words |
|---|---|---|
| Wyze | Cam v4 | Starting up; after setup, "Live stream is being viewed or a recording is in progress" |
| eufy | IndoorCams | "Live Streaming or Recording Events" |
| Tapo | C220 (quick start guide) | "Starting up" |
| Blink | Mini | "Unable to connect to your network, or the entered Wi-fi password may be incorrect" |
| Reolink | Battery Wi-Fi cameras | "WiFi connection failed" |
| Nest | Cam Indoor (wired, 3rd gen) | "LED isn't working properly" |
Each from the maker's own support page or guide, read 4 October 2026. Meanings differ between models of the same brand too; the camera named is the one the quotation is for.
Read across it and red splits into four meanings: recording or being watched, starting up, no network, and — on Google's newest indoor camera — a fault in the light itself. Wyze uses it for two of them: its support page says a solid red light "means that the camera is powered on and initializing the firmware, recording an event, or the user or shared users are watching the live stream". So before deciding a red camera is broken, check which brand you have.
What does a flashing red light mean?
On most brands, trouble. Blink's Outdoor and Indoor (3rd Gen) cameras "quickly flash a red LED every 3 seconds when disconnected from the internet"; a Ring doorbell flashing red at the bottom means "Insufficient power"; eufy IndoorCams blink red slowly when "Disconnected from the Internet". A quick red blink on a Tapo means it is resetting.
Blink adds one more that owners rarely know: "When the batteries are failing, the camera LED flashes Red 5 or 6 times after the Blue recording light goes out." If a camera is offline after a power cut rather than flashing, each maker's own advice is on the power-outage page.
What does a blue light on a security camera mean?
Usually that it is working or recording, but not always. Wyze's solid blue is "working properly"; eufy's SoloCam solid blue is "Charging"; Blink's Mini solid blue means it "is either recording motion or accessing a live view"; Nest's newest indoor camera shows solid blue while "Starting up or restarting".
Ring's doorbells use blue as a language of their own: a blue circle filling clockwise is charging, "Blue light spinning in a circle clockwise: Doorbell pressed", and "Solid blue circle light: Active call". Reolink keeps it simplest: on its battery cameras, "Blue means the WiFi connection of the camera is successful, while red means the WiFi connection failed."
| Maker | Green | Blue | Amber / other |
|---|---|---|---|
| Tapo | Solid: "Connected to the cloud" | — | Solid amber: "Connected to Wi-Fi" |
| Nest | Solid: working normally; pulsing: live view | Solid: starting up | — |
| Blink | Blinking: "fallen offline" | Solid: recording or live view | — |
| Wyze | — | Solid: "working properly" | Red and blue flashing: connecting |
| eufy | — | Solid: working (Indoor), charging (SoloCam) | Solid purple: "Initializing system" |
| Arlo | — | Solid: connected to power | Blinking amber: failed to sync, out of range, or battery low |
| Ring | — | Spinning: doorbell pressed; solid: active call | Solid white: idle |
| Reolink | — | Wi-Fi connected | — |
From the same pages, read 4 October 2026. A dash means the page read does not use that colour for the model named.
What does a green light mean?
Connected, on the brands that use it, with one trap. Tapo's solid green is "Connected to the cloud" and Nest's "Everything is working normally"; Nest pulses green while someone watches live. But a Blink Mini blinking green "has fallen offline and is attempting to reconnect".
Nest notes an exception in its own words: the camera's light "won't blink green if you use an Android phone's cellular data connection (not Wi-Fi) to stream video". If the light says offline and you suspect the Wi-Fi, the makers' advice on extenders and mesh is on the extender page.
What does an amber or orange light mean?
On Arlo, amber is the trouble colour that other brands make red. Arlo's fast blinking amber means "The camera failed to sync", and slow blinking amber that it "cannot be found, is out of range" or the battery is low. On a Tapo, solid amber simply means "Connected to Wi-Fi".
Arlo also says what to do during its "Alternating blue and amber" pattern: a firmware update is in progress, and in capitals, "DO NOT TURN THE CAMERA OFF." eufy uses alternating red and blue for the same thing, "Upgrading firmware", and Tapo a quick green blink, "Camera updating".
Does no light mean the camera is off?
Not necessarily. A Blink Mini with no light has "completed the setup process" and is online. A Nest Cam Indoor (wired, 3rd gen) with no light is either turned off or not getting power. Several makers let you switch the light off in the app.
Wyze and Blink each describe a setting that turns the status light off, Arlo one for its battery-charged light, and Nest one for brightness, so a dark camera may be working exactly as set. If every camera of one brand goes dark at once, the problem may be the maker's servers rather than your home; which makers publish a status page is on the status page.
If the red light means it is recording
On Wyze, eufy and Tapo cameras that record to a card, the recording is only as good as the card. A card made for continuous writing; specifications as published by SanDisk.
- Form
- microSDXC card, full-size SD adapter included
- Built for
- Continuous recording — dashcams and security cameras
- Goes in
- The camera itself, on every brand that takes a card
- Replaces
- Nothing — it is what makes the free tier work
As an Amazon Associate I earn from qualifying purchases. This costs you nothing and never affects what is covered here.
Corrections
Makers change light patterns between models and firmware versions. If a meaning here differs from your camera's, tell us the model and it is corrected with the date noted.
How this was checked
Every meaning was read from the maker's own page on 4 October 2026: Wyze, https://support.wyze.com/hc/en-us/articles/24191189800475 and https://support.wyze.com/hc/en-us/articles/24160745202971; eufy, https://service.eufy.com/article-description/Learn-About-the-LED-Indicator-Light-Status-on-eufy-IndoorCams and https://service.eufy.com/article-description/Learn-About-the-LED-Indicator-Light-Status-on-eufy-SoloCams; Tapo, https://static.tp-link.com/upload/manual/2023/202309/20230912/7106510242_Tapo%20C220(EU)1.0_QIG_V1-New%20VI.pdf; Blink, https://support.blinkforhome.com/en_US/2279381-understanding-the-leds-on-your-mini-camera and https://support.blinkforhome.com/issues-with-your-camera/red-light-on-a-camera; Reolink, https://support.reolink.com/articles/16102415624857-Introduction-to-the-Working-Modes-and-the-Status-LED-of-Battery-powered-WiFi-Cameras/; Google Nest, https://support.google.com/googlehome/answer/9268073; Ring, https://ring.com/support/articles/nqhe0/Understanding-doorbell-light-patterns; Arlo, https://www.arlo.com/en_gb/support/faq/642/What-do-the-different-LED-behaviors-on-my-Arlo-camera-mean. Nothing was tested; this page reports what the makers say each light means. Which of these cameras keep their video with no plan is on the roundup.